Loom Knitting Tools

Loom Knitting Tools

Choose a hand-operated spool knitter for cords and trim

Decide whether you need one cord profile or the ability to compare two head sizes with the same yarn.

Choose a tool for a cord or a wider piece of fabric

A hand spool knitter makes narrow tubular work for projects like ties and trim. A round hat loom gives you many more positions to make a wider tube. Start with the finished piece you actually want to make.

Compare the working heads

Clover supplies a three-pin and a six-pin disk with its Wonder Knitter. Use the same project yarn for a short sample on each head if you need to see how the two cord profiles sit against a drawstring opening or an edge.

Check what is supplied before starting

Look for the pick or needle in the exact pack. A French knitting spool with a fixed head is a sensible comparison for one repeat cord profile. A multi-head tool gives you another spacing and peg-count combination without buying a second body.

Source documentation

Guide questions

Should I choose a head using the advertised cord width alone?

Use the maker’s approximate widths to compare heads, then check a sample with your yarn before sizing a cord to fit an opening. The yarn and the way you work the loops affect the result.

Can I select a spool by the yarn label alone?

Check the maker’s yarn guidance, then try a short sample to see how the yarn moves between the pegs and through the opening.

Is a spool useful for a long flat tie?

A spool makes a narrow tube. Compare a small straight loom or a flat-strip pattern when you need the tie to lie flat.

Which accessory suits the job?

  1. The mushroom kit supplies yarn and a fixed spool for a first cord. Choose the Wonder Knitter if you want to compare three- and six-pin profiles using your own project yarn.

  2. Choose the six-eye Rayher spool when you want to work on one fixed count. The Boye spool gives you five- and eight-peg ends to compare two profiles.

Accessories in this guide

Shop these departments