Loom Knitting Tools

Loom Knitting Tools

Compare blanket looms for one-piece panels and joined strips

Decide whether you want one continuous panel or several smaller strips, then compare working pegs and bench space.

Start with the finished width in the pattern

Find the cast-on and required stitch gauge. A frame advertised as a certain length may be giving you the tool’s outside dimensions. Check what that number refers to before using it to plan a throw.

Compare the peg path with the work surface

The Knitting Board Afghan Loom has 198 pegs at 7/16-inch spacing on an S-shaped frame. Its curved path fits a long run of pegs into a shorter footprint. Compare this layout with a straight modular board if keeping the working row directly in front of you matters more.

Compare one panel with several joined pieces

If your loom cannot hold the pattern’s full cast-on, look for a pattern designed to join narrow panels or strips. Plan where the seams will fall. A wider frame makes more sense when the design calls for a single uninterrupted panel.

Source documentation

Guide questions

Will a frame marked 46 inches make a 46-inch blanket?

Check whether 46 inches describes the tool or a documented working width. Use the pattern gauge and your swatch to check the actual knitted width for your stitch and yarn.

Can I test a large straight loom without setting it up at full length?

On a modular design, check the instructions for a shorter setup and swatch on part of the frame. Match the spacing to the eventual full assembly.

What should I check before choosing a pattern that uses joined strips?

Read the joining instructions and compare the number and width of the strips. Make one strip first if the seam position matters to the design.

Which accessory suits the job?

  1. The Afghan Loom puts 198 pegs into an S-shaped single-knit path. The 28-inch board provides straight opposing rails with spacer settings, which matters for a flat double-knit pattern.

  2. Choose the fixed Afghan Loom for the same S-shaped setup each time. Compare the modular kit if your projects need different frame shapes or a choice of peg spacing.

  3. Choose the molded five-section kit if you want to snap the sections together. Compare the beechwood SGIBYN frame for a kit that joins the panels with steel plates and screws.

  4. Compare the 63- and 110-inch HEJIN formats by the working positions your pattern needs and the room you can give the assembled frame.

Accessories in this guide

Shop these departments